
Click & Collect Cars provide used vehicles, as such they are likely to include imperfections not associated with brand new cars, however, all vehicles are thoroughly prepared to ensure that the following items/parts and functionality are in correct working order. All orders are subject to your acceptance of these preparation standards.
1. Vehicle History
VIN Inspection
Vehicle History Report Obtained
Scheduled Maintenance Performed (inc timing belt)
Current MOT Certificate (if applicable)
2. Road Test
Cruise Control (if applicable)
Satisfactory starting, general performance and behaviour of the vehicle
Particular attention to the operation of clutch, transmission, steering, suspension and brakes including A.B.S
Ensure there are no abnormal noises
There are no visual fluid leaks after road test
Gauges operate properly
Check battery and starter motor start engine with ease from both hot and cold
Check to ensure no excessive visual emissions from exhaust
Check hot-starting and ensure no evidence of over-heating
Check no stored faults on the OBD
Ensure correct operation and efficiency of the parking brake
3. Vehicle Exterior
No dents or scratches visible from a distance of 2 metres
Windscreen free from any damage that would exclude the vehicle from an MOT test
Ensure there are no signs of bodywork corrosion
Operation and condition of exterior mirrors
Ensure all structural body repairs/accident damage have been repaired using manufacturer-approved methods
Ensure correct body panel fitting and alignment
Operation of fuel filler systems including petrol caps and lever release system
Operation of bonnet catch, safety catch, hinges, tailgate supports
Operation of door Locks and central locking including child safety locks
Ensure exterior trim for security and correct fitment
4. Vehicle Interior
Operation of door windows (manual/electric)
Operation of all exterior Lighting equipment and respective control lights and cluster illumination
Operation of wipers and washers
Operation of convertible roof mechanism (if applicable) Visual check of correct SRS functionality
All warning lights operate correctly
Operation of audio and alarm systems
Operation of Navigation System (if applicable)
Operation of Air-conditioning, heating and demist systems
Operation of instruments, gauges and controls
Operation of all internal equipment (e.g cigarette lighters, sun visors, arms rests etc)
Operation of visual and audible driver warning systems, Operation of parking assistance systems (if applicable) All drive pedals operate correctly
Ensure no evidence of water ingress
Operation and condition of seatbelts / Mountings
Security of seat mountings, headrests and seat adjustment mechanism
Operation of rear-view mirror/sun visors
Operation and condition of sunroof mechanism (if applicable)
Ensure correct operation of parcel shelf
Ensure interior trim / dashboard for tears, holes, burns of excessive soiling
5. Road Wheels & Tyre Check
Ensure vehicle jack, tool kit, locking wheel nut and safety equipment
Ensure minimum tread depth of 3mm across all tyres including spare (if applicable)
Ensure road wheels are free from distortion, gouges or visible cracking
Ensure tyres are free from cuts, bulges and inappropriate repairs
Ensure no evidence of uneven tyre wear or casing damage
6. Engine Compartment
Check engine oil for correct level and dipstick oil sample is free from contamination
Ensure coolant antifreeze content, and ensure system is free of visual contamination
Check vehicles charging system for minimum output
Ensure correct gearbox fluid levels, manual or automatic (where applicable)
Check to ensure all fluid levels, e.g brake, clutch, power steering, washer reservoir and battery (including security)
Auxiliary drive belts, condition and tension
Engine mountings for security and condition
Wiring, pipes, hoses, oil and fuel feed lines for routing; are free from damage, chafing and leaks (where visible)
Free from fluid leaks
Condition of cooling system radiator and engine oil cooler/intercooler are free from damage or excessive corrosion
No evident undue engine noise
For Hybrid vehicles only:
Operation of Hybrid cooling system
Switchable power-train mount
Hybrid entertainment and information display
7. Underbody
Exhaust condition and mountings
Clamps and security
Ensure no evidence of fluid or exhaust leaks
Catalytic Converter
Operation and condition of steering for leaks and security
Tie rod ends, CV boots and rack boots condition
Front and rear suspension
No visual evidence of faults to braking components
Ensure brake pads have a minimum of 50% material remaining
Check underbody for excess corrosion and ensure that the Chassis is free from extensive structural repairs
Ensure transmission / driveshaft is secure and free from excessive free play
8. Convenience
Fully Cleaned and Valeted Vehicles
Owners Guide
Keys and remote fobs
Service history (if applicable)
Ensure vehicle jack, tool kit, locking wheel nut and safety equipment
Ensure minimum tread depth of 3mm across all tyres including spare (if applicable)
Ensure road wheels are free from distortion, gouges or visible cracking
Ensure tyres are free from cuts, bulges and inappropriate repairs
Ensure no evidence of uneven tyre wear or casing damage
Check engine oil for correct level and dipstick oil sample is free from contamination
Ensure coolant antifreeze content, and ensure system is free of visual contamination
Check vehicles charging system for minimum output
Ensure correct gearbox fluid levels, manual or automatic (where applicable)
Check to ensure all fluid levels, e.g brake, clutch, power steering, washer reservoir and battery (including security)
Auxiliary drive belts, condition and tension
Engine mountings for security and condition
Wiring, pipes, hoses, oil and fuel feed lines for routing; are free from damage, chafing and leaks (where visible)
Free from fluid leaks
Condition of cooling system radiator and engine oil cooler/intercooler are free from damage or excessive corrosion
No evident undue engine noise
For Hybrid vehicles only:
Operation of Hybrid cooling system
Switchable power-train mount
Hybrid entertainment and information display
Exhaust condition and mountings
Clamps and security
Ensure no evidence of fluid or exhaust leaks
Catalytic Converter
Operation and condition of steering for leaks and security
Tie rod ends, CV boots and rack boots condition
Front and rear suspension
No visual evidence of faults to braking components
Ensure brake pads have a minimum of 50% material remaining
Check underbody for excess corrosion and ensure that the Chassis is free from extensive structural repairs
Ensure transmission / driveshaft is secure and free from excessive free play
Fully Cleaned and Valeted Vehicles
Owners Guide
Keys and remote fobs
Service history (if applicable)